Drawing Angle Valves

Angle Valves.

Command: vangle
Button: ()

You can draw angle valves with this command.

To draw angle valves:

1. Valve [Angle/Gate/GLobe] <GLobe>:
2. Specify the pipe diameter:
3. Specify the section scale factor:
4. Specify the pipe joints (*):
5. Specify start point (1):
6. Specify next point (2):
7. Specify the angle run direction (3):

To draw isovalves:

1. Valve [Angle/Gate/GLobe] <GLobe>:
2. Specify the section scale factor:
3. Specify start point (1):
4. Specify next point (2):
5. Specify the angle run direction (3):

In isometric mode:

1. Valve [Angle/Gate/GLobe] <GLobe>:
2. Specify the section scale factor:
3. Specify start point (1):
4. Specify next point (2):
5. Specify the angle run direction (3):

This function will allow you to create professional piping network CAD drawings.

Note:
To draw isovalves, click on iangle (), of the toolbars buttons.
(*) Option [Flanged/Threaded/Welded/Brazed/Glued/Socket/Grooved/Buttweld]

Related Topics:

 Gate Valve
 Check Valve
 Globe Valve
 Balance Valve
 Butterfly Valve
 Control Valve
 Diaphragm Valve
 Isolines
 Pipes
 Trazar Interface